S4AI - Module Of Analog Inputs

S4AI – Module Of Analog Inputs

S4AI module is designed to measure the standard signal (voltage, current, temperature, resistance, etc.) and to provide the measured values in a digital form via the MODBUS protocol. Input signals are divided into two groups of two inputs which are insulated with each other. RS485 interface and USB are isolated from the input, output signals and from the power supply. The module configuration is possible via the USB PORT or one of the available RS485 interfaces with the use of free e-Con software. e-Con software is available on the manufacturer’s website.

Description

The input signals are divided into 2 sets of 2 inputs, which are isolated from one another.
RS-485 and USB ports are isolated from input signals and the supply.

The module setting can be easily done through USB or one of the RS-485 interfaces using the free e-Con program.

Features:

Programmable individual characteristics of the inputs.
Operation in Modbus Slave mode.
Possible connection via the internal RS-485.
Two programmable alarm outputs.
Mathematical functions: addition, subtraction, multiplication, division, average, minimum, maximum.
Two virtual measurement channels to perform mathematical functions on the channels or between the measurement channels.
Programmable operating time counters.
Possibile configuration via USB (power supply of the module is not required)
Modular design and is dedicated to be mounted on the S-type rail acc. to EN 62208 ( module’s width is equal to 3 standard modules). It is perfect to be mounted in a switchboard cabinets.
External dimensions: 53 X 110 X 60 mm