Facilitated with complete range of highly accurate Mechanical & Electronic measuring Instruments & set-ups, Baldota Test & Calibration Laboratory (BTCL) has a wide range of Testing & Calibration facilities as per IEC/IS Standards accredited by NABL in both Mechanical & Electronic disciplines.

NABL Certificate for Calibration

[unitegallery NABL]
 

NABL Certificate for Electronics Testing

[unitegallery NABL2]

 

NABL Certificate for Mechanical testing

[unitegallery gallery8]

 

 

List of routine and type tests carried our on SMAR transmitters

LD-300 SERIES

SR. NO. DESCRIPTION
   
A Rountine & Acceptance Test
   
1 Dimensional Check
2 Hydrostatic Test
3 Air Leak Test
4 IR Test
5 Calibration
6 Helium Leak Test
   
B Type Test
   
1 DP Reversal Test
2 Over Pressure Test
3 Static Pressure Test
4 Response Time Test
5 Over Load Test
6 Supply Voltage Variation Test
7 Supply Voltage Depretion Test
8 Short Term Supply Voltage Interruption Test
9 Reverse Supply Voltage Protection Test
10 Burn In Test
11 Test on Enclosure
12 Short Term Drift (72 Hrs.)
13 Long Term Drift Test (30 Days)
14 Climatic (Damp Heat & Dry Heat) Test
15 EMI/EMC Test
15.1 Conducted Emission Tests (IEC-61000-6-4)
15.2 Radiated Emission Tests (IEC-61000-6-4)
15.3
Radiated Electric Field Immunity Test (IEC-61000-4-3)
15.4
Electric Fast Transient Test (IEC-61000-4-4)
15.5
Ring Wave Immunity Test (IEC-61000-4-12)
15.6 High Energy Surge Test (IEC-61000-4-5)
16 Seismic Test

LD-290 SERIES

SR. NO. DESCRIPTION
   
A Rountine & Acceptance Test
   
1 Dimensional Check
2 Hydrostatic Test
3 Air Leak Test
4 IR Test
5 Calibration
6 Helium Leak Test
   
B Type Test
   
1 Response Time Test
2 Test on Enclosure
3 Long Term Drift Test (30 Days)
4 Short Term Drift (72 Hrs.)
5 Climatic (Damp Heat & Dry Heat) Test
6 EMI/EMC Test
6.1 Conducted Emission Tests (IEC-61000-6-4)
6.2
Radiated Electric Field Immunity Test (IEC-61000-4-3)
6.3 Radiated Emission Tests (IEC-61000-6-4)
6.4
Electric Fast Transient Test (IEC-61000-4-4)
6.5
Ring Wave Immunity Test (IEC-61000-4-12)
6.6 High Energy Surge Test (IEC-61000-4-5)
7 Seismic Test