RE22 Digital Controller The RE22 controller co-operates directly with resistance thermometers (RTD) and thermocouples (TC) or quantity converters into a standard signal. It is destined for temperature control in plastics, food, glass, ceramics, dehydration industries and everywhere when it is necessary to stabilize temperature changes. The measuring input is universal for resistance thermometers and thermocouple sensors or for linear standard signals. The relay output, with a make-brake configuration ( with NOC or NCC contacts) allows to the direct control of low power objects. The manual control and soft-start are also possible. One can protect the controller against the undesirable change of parameters by means of a password. The auto-tuning function permits to select the PID setting in order to a quick output signal adaptation to object parameters. Read more
RE55 Controller The R55 controller is a microprocessor controller with an analog setting and digital measurement of the measured value. The controller controls the temperature in objects through switching on and off the electrical control device, in accordance with the definite set point by the controller. The controller co-operates directly with RTD and TC temperature sensors. The controller is destined to control temperature in plastics industry, food and dehydration industries, and everywhere when it is necessary to stabilize temperature changes. Read more
RE60 Temperature Controller The RE60 controller controls the temperature in objects through turning on and off the electrical controlling device according to the defined setting by the controller. It cooperates directly with RTD and TC. It is destined for the temperature control in telecommunication cabinets in food and drying industries and everywhere, where there is the necessity to stabilize the temperature changes. The controller has one output destined for the control and two alarm outputs. Read more
RE62 Universal Controller The RE62 controller is destined to control the temperature and other physical quantities (pressure, humidity, level, etc.) in plastics, food, dehydration industries and other where there is a need to stabilize the changes of the measured value. The measuring input is universal for the thermoresistors, thermocouples or standard linear signals. The controller allows dual-point control based on the PID or ON/OFF algorithm and alert signalization. The controller can be equipped with the relay outputs, continuous output and 24 V DC power output depending on the version. The innovative SMART PID algorithm has been implemented in the controller. All values and the configuration parameters of the controller are available via an optional RS485 communication interface. The output signals are galvanically isolated from the input signals and power supply. Read more
RE70 Temperature Controller The RE70 controller is destined for the temperature control. Controller works directly with the resistance sensors or thermoelectric sensors. The controller is equipped with one output that allows for dual-point control and alert signalization. Dual-point control is based on the PID or ON/OFF algorithm. Relay output is equipped with a switchable contact and allows for indirect control of the low-power objects.The innovative SMART PID algorithm has been implemented in the controller. Read more
RE71 Temperature Controller The RE71 controller is destined for the temperature control in plastics, food, dehydration industries and everywhere when the temperature stabilizing is necessary. Main features of the RE71 controller: 1) Direct co-operation with resistance thermometers (RTD) or thermocouple (TC) sensors, 2) Two-stage control acc. to the PID or ON-OFF algorithm, 3) One control output or alarm, relay output with make-and-break configuration, allowing to the direct control of low power objects An innovative SMART PID algorithm has been implemented in the controller. Read more
RE72 Temperature Controller The RE72 controller is destined for the temperature control in plastics, food, dehydration industries and everywhere when the temperature change stabilization is necessary. The measuring input is universal for resistance thermometers (RTD), thermocouple sensors (TC), or for linear standard signals. The controller has three outputs enabling the two-step control, step-by-step three-step control, three-step control of heating-cooling type and alarm signaling. The two-step control is acc. to the PID or ON-OFF algorithm. The innovative SMART PID algorithm has been implemented in the controller. Read more
RE81 Temperature Controller The RE81 controller is destined for the temperature control in plastics, food, dehydration industries and everywhere when the temperature stabilizing is necessary. The controller co-operates directly with resistance thermometers (RTD) or thermocouple sensors (TC), The controller has two outputs enabling the two-step control, step-by-step three-step control and alarm signaling. The two-step control is acc. to the PID or ON-OFF algorithm. The innovative SMART PID algorithm has been implemented in the controller. Read more
RE82 Temperature Controller The RE82 controller is destined for the temperature control in plastics, food, dehydration industries and everywhere when the temperature change stabilization is necessary. The measuring input is universal for resistance thermometers (RTD), thermocouple sensors (TC), or for linear standard signals. The controller has four outputs enabling the two-step control, step-by-step three-step control, three-step control of heating-cooling type and alarm signaling. The two-step control is acc. to the PID or ON-OFF algorithm. The innovative SMART PID algorithm has been implemented in the controller. Read more
RE92 Dual Loop Controller RE92 is an advanced dual loop controller for industrial use. It was designed for demanding industrial applications. RE92 can control two controlled objects independently or control two physical values in one object (e.g. in the two zone furnaces). Thanks to the universal measuring inputs, it can be used for controlling of temperature and other physical values (e.g. pressure, humidity). Every user can update controller’s software individually, thus getting access to the additional features added by the development team. Read more
RL10 Temperature Limiter The RL10 temperature limiter has been designed to use in all applications when there is a need to monitor heating processes and the system is to be switched into a safe mode in the event of any failure. Read more
RP1 1-Phase Power Controller The RP1 power controller is destined for automatic temperature control systems in electrothermal devices.It can be applied in electric circuits with resistance or inductive loads and resistance loads with a high temperature resistance coefficient. The RP1 power controller is a contactless power energy electronic device which includes a thyristor connector and electronic gate trigger system (GTS). This power controller allows to change the power delivered from the a.c. voltage source to the electric energy load in the function of the analog or pulse driving signal value. The system of two or three power controllers can be applied in three-phase actuators. Read more
RP3 Three – Phase Power Controller The RP3 power controller is a contactless three-phase power energy electronic device which includes a thyristor connector and an electronic gate triggering system. (GTS) This power controller allows the control of the power delivered from a three-phase voltage source to an electrical energy load in function of the control signal input. The RP3 power controller is destined for three-phase actuators with resistance or resistance-inductance loads in control systems and automatic temperature control. Read more
S4AI – Module Of Analog Inputs S4AI module is designed to measure the standard signal (voltage, current, temperature, resistance, etc.) and to provide the measured values in a digital form via the MODBUS protocol. Input signals are divided into two groups of two inputs which are insulated with each other. RS485 interface and USB are isolated from the input, output signals and from the power supply. The module configuration is possible via the USB PORT or one of the available RS485 interfaces with the use of free e-Con software. e-Con software is available on the manufacturer’s website. Read more
S4AO – Module Of Analog Outputs The 4-channels analog outputs module is designed to convert numerical data to standard (voltage or current) signals, by means of the MODBUS protocol. The output signals are divided into 2 sets of 2 outputs, which are isolated between themselves. RS-485 and USB ports are isolated from outputs signals and the supply. The module setting can be done through USB or one of the RS-485 interface using the available for free eCon program. Read more