Grid view List view
RP1 1-Phase Power Controller

RP1 1-Phase Power Controller

The RP1 power controller is destined for automatic temperature control systems in electrothermal devices.It can be applied in electric circuits with resistance or inductive loads and resistance loads with a high temperature resistance coefficient.

The RP1 power controller is a contactless power energy electronic device which includes a thyristor connector and electronic gate trigger system (GTS). This power controller allows to change the power delivered from the a.c. voltage source to the electric energy load in the function of the analog or pulse driving signal value. The system of two or three power controllers can be applied in three-phase actuators.

RP3 Three - Phase Power Controller

RP3 Three – Phase Power Controller

The RP3 power controller is a contactless three-phase power energy electronic device which includes a thyristor connector and an electronic gate triggering system. (GTS)

This power controller allows the control of the power delivered from a three-phase voltage source to an electrical energy load in function of the control signal input. The RP3 power controller is destined for three-phase actuators with resistance or resistance-inductance loads in control systems and automatic temperature control.

RP400WH Wireless HART™ Repeater

RP400WH Wireless HART™ Repeater

  • Extends the network range as a routing agent for WirelessHART™ communication network
  • Structured in loops and adopts architecture that utilizes a mesh network
  • Mesh networks allow for the network nodes to communicate between them and establish redundant paths until the base increasing reliability
  • Network also accepts scalability by the simple addition of more nodes or RP400 repeaters on the network
S4AI - Module Of Analog Inputs

S4AI – Module Of Analog Inputs

S4AI module is designed to measure the standard signal (voltage, current, temperature, resistance, etc.) and to provide the measured values in a digital form via the MODBUS protocol. Input signals are divided into two groups of two inputs which are insulated with each other. RS485 interface and USB are isolated from the input, output signals and from the power supply. The module configuration is possible via the USB PORT or one of the available RS485 interfaces with the use of free e-Con software. e-Con software is available on the manufacturer’s website.

S4AO - Module Of Analog Outputs

S4AO – Module Of Analog Outputs

The 4-channels analog outputs module is designed to convert numerical data to standard (voltage or current) signals, by means of the MODBUS protocol. The output signals are divided into 2 sets of 2 outputs, which are isolated between themselves. RS-485 and USB ports are isolated from outputs signals and the supply. The module setting can be done through USB or one of the RS-485 interface using the available for free eCon program.

Screen Recorder KD8

Screen Recorder KD8

The KD8 recorder is applied as a data acquisition station in measuring systems. It finds application to measure, visualize and supervise technical process parameters in various industrial branches, e.g. in pharmacy, food, chemical.
 
SD1 Magnetic Tool

SD1 Magnetic Tool

Smar™s SD1 Magnetic Tool is the second man-machine interface used to make local adjustments in the Smar™s transmitters and converters. It comprises the advantage of the powerful HHT and the convenience of the “good-old” screwdriver.

The instruments have, under the identification plate, holes for two magnetic switches activated by the magnetic tool. If the transmitter or converter are fitted with a display, and configured for Complete Local Adjustment, the magnetic tool is almost as powerful as the HHT. It eliminates the need for an HHT in most basic applications.

 

SI700: Interface RS232/RS485

SI700: Interface RS232/RS485

This module converts the electrical characteristics of the communication signal from the EIA/RS232 specification to EIA/RS485 specification.

The converter circuit provides signal isolation to grant a safe connection between two systems.

This module was designed to use the DFI/LC platform and so, no power supply was embedded in the board. It uses the +5Vdc lines from the IMB bus to energize the circuit.

 

SimulationView Strategy Simulator

SimulationView Strategy Simulator

The new Control Strategy Simulator is totally integrated to SYSTEM302. This software tool simulates Foundation fieldbus function blocks and IEC 61131-3 Ladder logic.

SimulationView is designed to train operators, teach control automation in technical schools and universities, test control application, develop and improve industrial processes. Operators are trained on the same graphical screens developed for real operation. Factory Acceptance Tests (FATs) and application tests can be performed before the system startup, speeding up the engineering process and project delivery.

SimulationView connects to the SYSTEM302 database and promptly alternates between the real and the simulated environment. There is no need to import or export strategy configurations

SM1 Module Of Analog Inputs

SM1 Module Of Analog Inputs

The SM1 2-channel module of analog inputs is destined to convert standard signals, resistance or temperature signals into numerical data accessible via the RS-485 or RS-232 port by means of the MODBUS protocol. The measurement is carried out independently in two channels. RS-485 and RS-232 output ports are galvanically insulated from input signals and the supply. The module programming is possible by means of the RS-485 or RS-232 port. In the set of SM1 module there is a connecting cable, to connect with the PC computer (RS-232).

SM2 Module Of Analog Inputs

SM2 Module Of Analog Inputs

 The SM2 4-channel module of analog inputs is destined to convert standard signals, resistance or temperature signals into numerical data accessible through the RS-485 or RS-232 port by means of the MODBUS protocol.
The measurement is carried out independently on four, galvanically insulated between them channels. RS-485 and RS-232 output ports are galvanically insulated from input signals and the supply. The module  programming is possible by means of the RS-485 or RS-232 port. In the set of SM2 module there is a  connecting cable, to connect with the PC computer (RS-232).

Placeholder

SMAR OLE Server

OLESERVER for Smar Fieldbus Interfaces allows for any Man Machine interface (HMI) to access standard Fieldbus data through the use of the standard OLE interface for Process Control (OPC)

SR11 System for Injection Moulds with Heated Channels

SR11 System for Injection Moulds with Heated Channels

The SR11 system is destined for the temperature control in injection moulds with heated channels and for other systems in plastics processing. It is composed of BR11 controllers and a set of connecting cables.
The RS-485/MODBUS digital interface and the software on PC enable the supervision of the data archiving process (the LUMEL 3000 software for data archiving and visualisation must be ordered separately).
The Fuzzy Logic algorythm ensures a high accuracy of the temperature control and an optimal energy consumption. The function of softstart and leakage current control warrant the reliability of heaters. During the machine operation break, a decreased
temperature is maintained, what enables a fast start.

SUP303 Profibus-DP Transient Suppressor and Anti-Surge

SUP303 Profibus-DP Transient Suppressor and Anti-Surge

The SUP303 has advanced technology for protection in three stages. Its advanced components work in peaks of high voltage and short duration, high current, high voltage, low impedance with fast response and effective protection against ESD and EMI. The SUP303 circuits were developed to provide effective and coordinate protection in reaction to a transitory at the Profibus-DP port. The primary stage protects from the exposition to an excess of transitory voltage, at a lower level. When the current transient exceeds the trigger limit, the second stage responds in microseconds,thus limiting the current. The third stage keeps the voltage within the Profibus-DP drive limits.

SYSCON Foundation Fieldbus System Configuration

SYSCON Foundation Fieldbus System Configuration

The SYSCON is a powerful and user friendly software tool to configure, maintain and operate a FIELDBUS based system through a PC. The WINDOWS™ graphic user interface is so easy to use that no previousknowledge of computers is required. The computer can communicate with a FIELDBUS network via a PCI or any other suitable interface.

The software includes the functions:

SYSTEM AND DEVICE CONFIGURATION
With this function it is possible to communicate with all devices in the network, assign tags, configure the control strategy, adjust parameters and download a configuration.

SYSTEM MAINTENANCE
This function communicates with all field instruments, and accesses information about instrument manufacturer, materials of construction, ranges, etc. It also allows for transducer calibration and controller tuning. The on-line diagnostic report is a very powerful tool for plant reliability. Complete maintenance reports are issued according to the user’s configuration. Alarm and events reports are issued on line.

SYSTEM OPERATION
The user can have indication of variables, historical trends, alarm logs, etc. They can also change parameters and settings or send commands. It is the ideal tool for plant commissioning!