Tag View 3.1 is an OLE for Process Control Client Application (OPC Client) specially developed to validate a Fieldbus Configuration. This software monitors the Function Blocks and their parameters in the two forms of windowing: Tag View Window to display value and status of process variable in a real time trend graphic. You can use Tag View Window to analyze the statistical behavior of the process variables, also. Tag View window determines the maximum and minimum values and the number of overshoots and undershoots that exceed a specified dead band of the configured tags.
The N14 meter is a programmable digital panel instrument destined for the measurement of 3-phase, 3 or 4-wire power network parameters, in balanced or unbalanced systems with the simultaneous display of measured quantities and digital transmission of their values. This network parameter meter enables the control and optimization of power electronic devices, systems and industrial installations. The N14 meter ensures the measurement of: RMS voltage and current, active, reactive and apparent power, active and reactive energy, power factors, frequency, mean active power (e.g. 15-min mean power). Voltages and currents are multiplied by given current and voltage ratios of measuring transformers. Indications of power and energy take into consideration programmed ratio values. The value of each measured quantity can be transmitted to the master system through the RS-485 interface. The relay output signals the exceeding of the chosen quantity and the impulse output can be used for the consumption control of the 3-phase active energy. The meter has a detection and signaling of incorrect phase sequence. The meter is fixed to the panel by means of screw holders.
The ND1 Power Quality Analyzer is destined for the measurement and analysis of 3-phase, 3 or 4-wire power network parameters, in balanced or unbalanced systems.
TLK- TT306 series temperature transmitter supports HART, FF, and PA protocols. It can be
widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc.
TLK- TT306H HART temperature transmitter, using the HART technology, is a new generation of smart HART temperature transmitter and it is an indispensable field device for process control. TLK- TT306H integrates abundant functions and realizes not only general
measurement function but also complicated control strategy. TLK- TT306H uses digital
technology, so it can connect with many types of thermocouple and thermo resistive sensors.
It has wide range and simple interface between field and control room, which reduces the
expense of installation, operation and maintenance.
The TLK-TT306H-R is a HART enabled intelligent temperature transmitter made by Baldota.
This device measures temperature using RTD’s, thermocouples, resistance or mV input.
The TLK-TT306H-R mounts on any industry standard “T” type DIN rail for easy integration
with various sensors. The TLK-TT306H-R meets all HART Foundation physical layer
requirements and is fully configurable through software.
TLK-TT305 supports HART, FF, and PA protocols. It can be widely used in the petroleum,
chemicals, electricity, and metallurgical industries, etc.
TLK-TT305 smart temperature transmitter, using the HART technology, is a new generation
of smart fieldbus temperature transmitter and it is an indispensable field device for process
control. TLK-TT305 transmitter integrates abundant function blocks and realizes not only
general measurement function but also complicated control strategy.
TLK-PPT is a 4 – 20 mA loop powered pressure transmitter capable of measuring gauge pressure for a variety of applications including vapors, liquids and gases.
The compact size, simplistic installation and economical cost make it an ideal choice for Most pressure applications with measurement ranges up to 50 Mра.
The TLK-PPT can be mounted in any orientation and uses a 1/2″ NPT Standard Process Connection.
The TP290 is from the well-know family of SMAR’s devices. It is a transmitter for position measurements. It can measure displacement or movement of rotary or linear type. The digital technology provide an easy interface between the field and control room and several interesting features that considerably reduce the installation, operation and maintenance costs.
The TP290 is versatile and reliable, and has very high accuracy. It may be used for control valve stem position measurement, or in any other position sensing application such as louvers, dampers, crushers, etc. The TP290 is very versatile, users can standardize one position indicator for all different kinds of control valves and other machines, keeping spares and training to a minimum.
The TP301 is part of the HART family of Smar’s devices. It is a smart transmitter for position measurement. It can measure displacement or movement of rotary or linear type. The digital technology and communication provides an easy interface between the field and control room and several interesting features that considerably reduce the installation, operation and maintenance cost.
The TP302 is from the first generation of Fieldbus devices. It is a transmitter for position measurements. It can measure displacement or movement of rotary or linear type. The TP302 reads the position and makes it available to Fieldbus system. The digital technology and communication provide an easy interface between the field and control room and several interesting features that considerably reduce the installation, operation and maintenance costs.
The TP303 is from the first generation of Profibus-PA devices. It is a transmitter for position measurements. It can measure displacement or movement of rotary or linear type. The digital technology and communication provide an easy interface between the field and control room and several interesting features that considerably reduce the installation, operation and maintenance costs.
The TP303 is versatile and reliable, and has very high accuracy. It may be used for control valve stem position measurement or in any other position sensing application such as louvers, dampers, crushers, etc. Since the TP303 uses a non-contact magnetic coupling for position sensing, it is less sensitive to vibration than other solutions, resulting in longer operational life. The TP303 is part of Smar’s complete 303 line of Profibus-PA devices.
TP400WH is a position transmitter with digital communication and is part of the well-known Smar´s HART family for position measurement. It was developed to measure rotary or linear displacements or motions using sensor HALL technology, without mechanical contact. Its technology provides a series of advantages and features that greatly reduces on installation, operation and maintenance costs.
It is widely used on applications that require monitoring real position of valves and actuators.
Primary Lithium batteries (Li-SOCI2) of 3.6 V, totalizing 7.2 V.
The TT1.0 a temperature transmitter extremely versatile, which can be used with practically all the sensors, including load cells, resistive position indicators, etc. The same unit may be used for different measuring ranges and different types of sensors that include a wide variety of RTDs and thermocouples, besides the inputs for millivolt and resistance. Thus, the plant inventory can be standardized, as it can replace several types and models of conventional transmitters. It’s the best cost/benefit in its class. It is available in two communication protocol: 4 a 20 mA + HART and PROFIBUS-PA.
The TT302 is from the first generation of FIELDBUS devices. It is a transmitter mainly intended for measurement of temperature using RTDs or thermocouples, but can also accept other sensors with resistance or mV output such as: pyrometers, load cells, resistance position indicators, etc. The digital technology used in the TT302 enables a single model to accept several types of sensors, an easy interface between the field and the control room and several others features that considerably reduces the installation, operation and maintenance costs.
TT303 (PROFIBUS PA protocol) can be configured using Simatic PDM and by the FDT (Field Device Tool) and DTM (Device Type Manager) concept tools, such as FieldCareTM and PACTwareTM. It can also be integrated by any PROFIBUS System using the GSD file. PROFIBUS PA also has quality and diagnostic information, improving plant management and maintenance.
The TT303 is a transmitter mainly intended for measurement of temperature using RTDs or thermocouples, but can also accept other sensors with resistance or mV output such as: pyrometers, load cells, resistance position indicators, etc.
The digital technology used in the TT303 enables a single device to accept several types of sensors, wide ranges, single-ended or different measurement and an easy interface between the field and the control room and also includes several interesting features that reduce considerably the installation, operation and maintenance costs. The transmitter accepts two channels, i.e., two measurements. This reduces the cost per channel.
TT383 has independent channels able to measure up to eight temperatures points (simple, differential and backup measurement). The temperature information are available via Profibus PA communication protocol.
SMAR TT383 is a compact and lightweight transmitter for rail mounting. The digital technology used in the TT383 allows several types of sensors, large ranges, single or multiple-ended measurement and an easy interface between the field and the control room. It also includes several features which reduce considerably the installation, operation and maintenance costs.
TT383 PA can be configured by:
Profibus View
Asset View
Simatic PDM
Other manufactures’ configuration tools based on FDT/DTM and DDL/EDDL.
For management and diagnostics, AssetView ensures continuous information monitoring.
